Skip to content
QuickshipTechnologies

HRKSA6 min read

Qiwa Contract: How Saudi Employers Document and Update It

Qiwa contract guide for Saudi employers: how to document it, why Nitaqat counts it, and how to update it when salary changes. Steps and checklist.

By · Published

Looking for the software itself? See our HR software UAE, free to try for 3 days.

A Qiwa contract is an employment contract that a Saudi establishment creates and documents electronically on the Qiwa platform, and that the employee approves from their own Qiwa account. Since 15 April 2026, HRSD calculates Nitaqat Saudization rates from contracts documented this way. So if you employ Saudis, the contract on Qiwa needs to exist, and it needs to match what you actually pay.

This guide covers the steps, what to do when salary changes, and the mistakes that leave contracts out of step with payroll.

What is a Qiwa contract?

A Qiwa contract is the electronic record of an employee's terms, created through the Contract Management service. The HRSD service page says the service lets establishments create and document employee contracts electronically.

The contract data includes:

  • Job title
  • Contract duration
  • Working hours
  • Financial obligations, which is where salary and allowances sit

Two conditions apply, per the same page. The establishment must be running. The employee must not already hold a valid contract on Qiwa.

Once created, the employee gets the request in their Qiwa Afrad (individual) account. They can approve it, reject it or ask for an amendment. If both parties agree, the contract counts as certified and approved by HRSD.

Why does a Qiwa contract matter for Nitaqat in 2026?

Because HRSD now counts Saudi employees in your Nitaqat rate based on documented contracts. In its official news item, HRSD called documenting Saudi employees' contracts on Qiwa a fundamental requirement for inclusion in the rates. It urged establishments to complete documentation to avoid any impact on their classification.

Say a Riyadh trading company has 12 Saudi employees on payroll and GOSI. Only 9 have documented contracts. Based on the HRSD notice, the other 3 are at risk of not being counted. That is a hypothetical, but it is the exact gap HRSD is warning about.

KPMG's flash alert reports documentation targets of 85% by 30 April 2026 and 90% by 30 June 2026. That is a secondary source, and I did not see those figures on the HRSD page. Both dates have passed. Check your own Qiwa account and the HRSD site for where you stand today.

How do you document a contract on Qiwa?

Log in to Qiwa Business, open Contract Management, fill in the contract and send it to the employee. The HRSD page lists these steps:

  1. Sign up on Qiwa.
  2. Choose the establishment.
  3. Choose "Contract Management and Documentation".
  4. Complete the establishment details.
  5. Enter the employee details.
  6. Fill in the contract data: job title, duration, working hours and financial obligations.
  7. Send the request to the employee.

On my.gov.sa, the path in Qiwa Business is the Services tab, then "Contract Management" under "Manage current employees". The listed actions are create, update, terminate and absent employees. The same page describes tracking contract expiry dates.

Before you press send

  • Check the salary figure against your latest payroll, not against the offer letter from two years ago.
  • Check that basic salary and each allowance are listed the way you pay them.
  • Check the job title matches the actual role.
  • Tell the employee a request is coming and ask them to approve it in Qiwa Afrad.

What happens when salary changes after the contract is documented?

You update the documented contract and the employee has to approve the change. Do not just change the number in payroll and leave Qiwa as it is.

The HRSD guideline describes the process. The establishment submits a request to document a new contract or update existing ones. The employee can approve, reject or propose amendments. Once both approve, the contract is documented.

Law firm Almadani says a material change to wage, duties or work location needs the employee's explicit consent via Qiwa, and that without it the amendment may be void. That is a law firm's view, so ask your own adviser for your case.

Situation What to do What to watch
Annual raise Update the documented contract, send to employee Employee must approve in Qiwa Afrad
New housing or transport allowance Add it to the financial obligations, send for approval Keep it identical to what payroll pays
Promotion with new title Update job title and salary together One request, so the record changes at once
Employee rejects the change Talk to them and send a corrected request Practitioner guides report the old contract stays in effect
Salary cut Get legal advice first Needs explicit consent and may carry other legal limits

One caution. Sources I found disagree on whether an approved contract can be edited at all. The HRSD guideline and my.gov.sa both describe an update action, so I would trust those. If your Qiwa screen does not show an edit option, ask HRSD or Qiwa support before you work around it.

Does a Qiwa contract make the wage clause enforceable?

Only if two extra conditions are met. The HRSD guideline on the "Documented Employment Contract as an Enforceable Instrument" initiative says the wage clause of a Qiwa-documented contract can be an enforceable instrument. It requires the contract to follow the Executive Employment Contract template. It also needs an Execution Number from the Ministry of Justice Documentation Center, generated through integration between the two ministries.

The wage clause covers basic salary, housing allowance if applicable, and other listed items.

Elaqat Law cautions that Qiwa documentation alone should not be assumed to give this status. The template and the Execution Number are needed too.

For you as an employer, the point is simple. If the wage clause can be enforced, then the figure in it matters even more. An old, lower or higher number left in the contract is a real problem, not just a paperwork one.

What are the common mistakes?

Most problems come from contracts and payroll drifting apart. Watch for these:

  • Raise in payroll, nothing in Qiwa. The salary changes monthly, the contract never does.
  • Sent but never approved. The request sits in the employee's Qiwa Afrad account. Nobody follows up.
  • Allowances missing. Housing or transport is paid, but not listed in the financial obligations.
  • Expiry dates ignored. A fixed-term contract ends and no one renews it.
  • Assuming GOSI registration is enough. Per HRSD, Nitaqat counts documented contracts.
  • Assuming it is automatically enforceable. The template and Execution Number matter.

How do you keep contracts and payroll in step?

Keep one internal record of each employee's salary, allowances and contract end date, and review it every month before payroll runs. Qiwa is where you document the contract. Your own record is how you notice that something changed.

If you want that in software, the Quickship HR module tracks visa and document expiry, leave and payroll inputs. It does not file anything on Qiwa for you. It gives your HR person one place to see who is due for a contract update, so the Qiwa request goes out on time.

A simple monthly routine:

  1. Export the list of Saudi employees and their current salary.
  2. Compare it with the contract data on Qiwa.
  3. Send an update request for every mismatch.
  4. Chase every request still waiting for employee approval.
  5. List contracts ending in the next 90 days.

This takes less time than fixing a Nitaqat count after the fact.

Frequently asked questions

Can an employee reject a Qiwa contract?

Yes. After the employer sends the request, the employee can approve it, reject it or ask for an amendment through their Qiwa Afrad account, according to the [HRSD service page](https://www.hrsd.gov.sa/en/ministry-services/services/%D8%A5%D8%AF%D8%A7%D8%B1%D8%A9-%D8%A7%D9%84%D8%B9%D9%82%D9%88%D8%AF). The contract only counts as certified once both sides agree. Talk to the employee before you send it, so the request does not come as a surprise.

Does a documented Qiwa contract count for Nitaqat if the employee is already on GOSI?

Not on its own. HRSD says Saudization rates under Nitaqat are calculated from contracts documented electronically on Qiwa, effective 15 April 2026. A Saudi employee who is on payroll and registered with GOSI but has no documented contract is at risk of not being counted. Check the HRSD notice and your own Qiwa account for your exact position.

Do I need a new contract when I give a raise?

You need to update the documented contract, not start from nothing. The HRSD guideline describes a process where the establishment submits a request to update existing contracts and the employee approves, rejects or proposes amendments. Practitioner guides report that if the employee rejects the change, the old contract stays in effect. Confirm the exact steps in your Qiwa Business account.

Is a Qiwa contract the same as an enforceable instrument?

Not automatically. The HRSD guideline says the wage clause can be enforceable when the contract follows the Executive Employment Contract template and carries an Execution Number from the Ministry of Justice Documentation Center. A law firm, [Elaqat](https://www.elaqatlaw.com/post/what-is-qiwa), warns against assuming Qiwa documentation alone gives that status. Ask your legal adviser if you rely on it.

Sources

  1. HRSD: Nitaqat Saudization rates based on contracts documented on Qiwa
  2. HRSD: Contract Management service
  3. my.gov.sa: Contract Management service
  4. HRSD guideline: Documented Employment Contract as an Enforceable Instrument
  5. KPMG GMS Flash Alert 2026-116 (secondary source)
  6. Elaqat Law: What is Qiwa (secondary source)

Rules and fees in the UAE and Saudi Arabia change. This guide reflects the sources above on 16 November 2026. Check the official source before acting on it.

HR Module

Employee records, documents, leave and attendance for GCC teams.

Book a demo

Related guides

Instant quote