SourcingUAE & KSA6 min read
Three Way Match: Catch Supplier Over-Billing Before You Pay
Three way match checks the PO, goods receipt and supplier invoice before you pay. See the steps, a UAE worked example and FTA input VAT checks.
By Quickship Editorial Team · Published
Looking for the software itself? See our procurement software UAE, free to try for 3 days.
A three way match compares three documents before you pay a supplier: the purchase order (PO), the goods receipt note (GRN) and the supplier invoice. If the price, quantity and item on all three agree, you pay. If they don't, you hold the invoice, and that is how you catch over-billing before the money leaves your account and before the VAT lands in your return.
In the UAE this matters more since the FTA's Decision No. 13 of 2026 took effect on 1 October 2026. A valid tax invoice is no longer the only thing you need before claiming input VAT.
What does a three way match compare?
It compares what you ordered, what you received and what you were billed. Each document answers a different question.
| Document | Who creates it | Question it answers |
|---|---|---|
| Purchase order | Your buyer | What did we agree to buy, at what price? |
| Goods receipt note | Your warehouse or receiving team | What actually arrived, and in what condition? |
| Supplier invoice | The supplier | What are they asking us to pay? |
Prices on the invoice are checked against the PO. Quantities on the invoice are checked against the receipt (Document Management Systems).
A two-way match skips the receipt. A four-way match adds an inspection report (Precoro). Two-way is common for services. Three-way is the usual choice for physical goods (Purchase Order OCR).
How do you run a three way match step by step?
Run it in the same order every time, and don't let anyone pay around it. Here is a simple process for a trading company or e-commerce seller in Dubai or Riyadh.
- Raise a PO before the order. Put item, quantity, agreed unit price, currency, delivery terms and payment terms on it.
- Record the receipt on the day goods arrive. Count what came in at the warehouse, at your Jebel Ali or KEZAD unit, or at your Dammam store. Note shortages and damage on the GRN.
- Log the supplier invoice when it arrives. Capture the invoice number, date, supplier tax registration number, lines, amounts and VAT.
- Match line by line. Compare item, quantity and unit price across all three documents.
- Match against the receipt, not the PO total. If less arrived than you ordered, you pay for what arrived. The PO stays open for the rest (Precoro).
- Send mismatches to a named person. Name one owner for each exception, with a deadline to resolve it.
- Approve and pay only on a clean match. Keep the three documents together.
Tolerances differ by system and by company. Some teams accept tiny rounding differences and block everything else. Pick your own limit and write it down. We won't suggest a percentage here because there is no official one.
What does over-billing look like in a real match?
It usually looks small on each line and large over a quarter. Here is a hypothetical example.
Say a Dubai trading company orders 500 units of a spare part at AED 20 each. The PO value is AED 10,000, excluding VAT. The supplier delivers 450 units. The invoice arrives for 500 units at AED 21 each.
| PO | Goods receipt | Invoice | Result | |
|---|---|---|---|---|
| Quantity | 500 | 450 | 500 | Invoice is 50 over the receipt |
| Unit price (AED) | 20 | n/a | 21 | Invoice is AED 1 over the PO |
| Line value, excl. VAT (AED) | 10,000 | 9,000 at PO price | 10,500 | Gap of AED 1,500 |
A two-way match would only spot the price. It would miss the 50 units that never arrived. The three way match finds both problems. You pay AED 9,000 plus the matching VAT, or you ask the supplier for a corrected invoice.
Two common causes of this kind of gap are a supplier billing the full order after a partial shipment, and a price list update that never reached your buyer.
How does a three way match protect your input VAT claim?
It gives you clean evidence that the supply happened as invoiced, which is the base for any input VAT claim. It does not replace the verification steps the FTA now expects.
Here is what the secondary summaries of FTA Decision No. 13 of 2026 say. We could not read the full Decision text for this post, so check the FTA's PDF before you rely on any detail.
- It sets out measures for verifying the validity and integrity of supplies before input tax is deducted. It took effect on 1 October 2026 (PwC).
- You verify the supplier on first dealing, or again if you did not verify it in the previous 12 months (PwC).
- You also verify the supply itself, including its commercial rationale and the supplier's involvement (PwC).
- Verification is not required for a single supply under AED 10,000 excluding VAT, as long as total supplies from that supplier stay under AED 100,000 in 12 months (VAT Update).
- Keep the evidence in your vendor master or a linked file so the review can be reproduced in an FTA audit (VAT Update).
- One summary says supplier payments must be made electronically (Vision Taxation). If a supplier still expects cash on delivery, ask your tax adviser how to handle it.
Notice how the matched file helps. The PO shows the commercial reason for the purchase. The GRN shows the goods arrived. The invoice shows the price. Together they are a good start on your evidence file, but they are not the whole answer. Supplier verification still has to be done and recorded.
In the example above, the AED 10,500 invoice is over the AED 10,000 single-supply line, so verification would apply. That is why the match should run before the VAT figure goes into your return, not after.
What about Saudi Arabia?
The matching method is the same in Saudi Arabia. The tax rules around it are not, and we have not covered them here. Check what ZATCA requires for e-invoicing (Fatoora) and input VAT on the ZATCA portal, and confirm with your tax adviser which requirements apply to your suppliers. A supplier invoice that does not meet ZATCA's requirements is a reason to hold payment, whatever the three documents say.
Which mistakes make a three way match fail?
Most failures are process gaps, not maths errors.
- POs raised after the invoice. The match becomes a rubber stamp.
- Receipts logged late or in bulk. The warehouse signs a delivery note at the gate and nobody records it until month end.
- Paying on the PO total. A partial shipment gets paid in full.
- Free-text items. "Spare parts" on the PO and "Misc. supplies" on the invoice can't be matched line by line.
- Currency and unit mismatches. A PO in USD and an invoice in AED, or cartons versus pieces.
- No owner for exceptions. Held invoices sit in a shared inbox until the supplier chases.
- Verification kept in someone's head. Decision 13 summaries stress that evidence must be reproducible in an audit.
How do you make it easier to run?
Keep the PO clean and everything after it gets easier. A PO built from an approved supplier quote has the right item names, prices and terms from the start.
Quickship's Sourcing module handles RFQs, supplier quotes and purchase orders in one place, so your buyer raises the PO from the quote that was actually accepted. That gives your finance team a reliable first document to match against. Quickship is software only. Receiving, storing and paying stay with your team.
A short weekly routine also helps:
- List invoices held for mismatch and who owns each.
- Check any supplier nearing the AED 100,000 aggregate line in 12 months.
- Confirm every paid invoice has its PO, GRN and verification note on file.
Frequently asked questions
Do I need a goods receipt for services?
Usually not. A two-way match (PO and invoice) is common for services, and a three-way match is the norm for physical goods. For services, use a signed timesheet, a completion note or an approval from the budget owner as your proof that the work happened.
What should we do with an invoice that has no PO?
Treat it as an exception. Most finance teams hold it until a manager approves it and a PO is raised after the fact, with a note on why. Do not let it skip the check just because the supplier is a long-standing one.
How do partial deliveries work in a three way match?
Match the invoice to what was received, not to the PO total. If 450 of 500 units arrived, you pay for 450 and the PO stays open for the other 50. Ask the supplier for a corrected invoice or a credit note for the gap.
Does a three way match replace the FTA supplier checks?
No. It proves the price and quantity are right. The supplier verification under FTA Decision No. 13 of 2026 is a separate step that covers the supplier and the supply itself, so run both before you claim input VAT.
How tight should the price tolerance be?
There is no official figure, and systems differ in how they apply tolerances. Set a small limit your finance manager is comfortable with, apply it per line, and write it into your payment policy so every exception is judged the same way.
Sources
- FTA Decision No. 13 of 2026 on Measures (tax.gov.ae, PDF)
- PwC Middle East: FTA Decision No. 13 of 2026 on verification of supplies before input tax deduction
- VAT Update: UAE FTA Decision No. 13 of 2026 input VAT supplier verification rules
- Document Management Systems: Three-way match guide
- Precoro: Why implementing 3-way matching is important
- Purchase Order OCR: Three-way matching guide
Rules and fees in the UAE and Saudi Arabia change. This guide reflects the sources above on 19 November 2026. Check the official source before acting on it.
