Skip to content
QuickshipTechnologies

InventoryUAE & KSA6 min read

Cycle Counting vs Annual Stock Take for GCC Warehouses

Cycle counting lets UAE and Saudi warehouses keep stock accurate without a year-end shutdown. See the method, a worked example and which records to keep.

By · Published

Looking for the software itself? See our inventory management software UAE, free to try for 3 days.

Cycle counting means counting a small slice of your stock every working day, so every SKU gets checked several times a year and you don't close the warehouse for a full stock take. For most UAE and Saudi warehouses it keeps system quantities honest all year. You may still need a count near year end, because that is something to agree with your auditor.

What is the difference between cycle counting and an annual stock take?

An annual stock take counts everything on one or two days. Cycle counting counts a rolling schedule of locations or SKUs, with the most important items counted most often.

Annual stock take Cycle counting
When One or two days a year, often over a weekend A little each working day
Operations Usually paused or slowed Continue, with only the counted locations paused
Error found Months after it happened Days or weeks after it happened
Root cause Hard to trace Easier, the movement is recent
Labour A big team for a short time One or two people, steady
Output One count for year end A running record of counts and variances

The annual count is not wrong. It is a blunt tool. If a pallet was mis-received in March, you find the gap in December and nobody remembers the delivery.

Does the law in the UAE or Saudi Arabia require an annual stock take?

The official pages cited here don't prescribe a counting method. They talk about keeping records.

  • UAE VAT. The FTA guide on tax obligations says VAT-registered businesses must keep inventory records, including quantities and values at the end of a tax period, and records of stock-counts linked to those statements. The minimum is 5 years after the end of the tax period.
  • UAE Corporate Tax. The FTA Corporate Tax General Guide says records must include a record of stock held at the end of the Tax Period, kept for seven years. The guide is dated 2023, so check tax.gov.ae for later updates.
  • KSA VAT. ZATCA's Agents Guideline says records are kept for at least 6 years. Under the ZATCA invoicing and records guideline, you must make invoices, books and related documents available during inspections and audits. Those ZATCA pages don't say anything specific about stock counts.

So the duty is to have a reliable, dated stock record at period end and to keep the count evidence. Valuation is a separate question. IAS 2 says inventories are measured at the lower of cost and net realisable value. It does not say how often to count.

Your external auditor may still want to see or attend a count close to year end. Ask them early. If you hold goods in a bonded area or a free zone such as JAFZA or KEZAD, also check the operator's and customs' rules on counts, because they vary.

How do you set up cycle counting step by step?

Start small. A simple schedule you follow beats a perfect one you drop in week three.

  1. Clean up locations first. Every shelf, bin or pallet position needs a unique code. Counting "somewhere in aisle C" gives you nothing to compare.
  2. Split SKUs into A, B and C classes. A is high value or fast moving. B is the middle. C is slow or low value. Use your last 12 months of sales and cost data.
  3. Set a frequency per class. For example, A monthly, B quarterly, C twice a year. Adjust after the first cycle.
  4. Turn the frequency into a daily list. Divide counts needed by working days. Mix classes so no one day is heavy.
  5. Count blind. The counter sees the location, not the system quantity. This stops people "confirming" the number on the screen.
  6. Freeze movement on the counted locations. Finish open picks and putaways, count, then release. Don't stop the whole building.
  7. Recount any variance above your tolerance. A second person counts. If it still differs, post the adjustment with a reason code.
  8. Find the cause, not just the number. Wrong unit of measure, mis-received carton, mislabelled bin, a return put away in the wrong place.
  9. Sign and file the count sheet. Date, counter, checker, location, counted quantity, system quantity, variance and reason. Keep it for the longest period that applies to you.

What does cycle counting look like in a real warehouse? (worked example)

This is a hypothetical example. Say a Dubai warehouse near Dubai Silicon Oasis holds 2,000 SKUs for an online seller on Amazon.ae, noon and Shopify. Working month is 22 days.

Class SKUs Count frequency Counts per day
A 200 Monthly About 9
B 600 Quarterly About 9
C 1,200 Twice a year About 9
Total 2,000 About 27 lines

Twenty-seven count lines a day is a job for one or two people, not a weekend shutdown. Every A item gets checked 12 times a year. Under an annual stock take, it gets checked once.

Now say a count on an A item shows 14 units fewer than the system. Because the count is fresh, you check last week's movements. You find a return from a COD order was received into stock but never inspected, and it was sitting in the returns cage. The fix is a process change at returns, not a year-end write-off.

Which method suits which warehouse?

Cycle counting is not always the right answer on its own.

  • Choose cycle counting if you have many SKUs, constant movement, marketplace orders that depend on accurate stock, or high COD returns.
  • Keep a full count if you have few SKUs, low movement, a landlord or auditor requirement, or a system you don't yet trust.
  • Use both if you are moving to cycle counting. Do one full count to set a clean baseline, run cycle counts for a year, then ask your auditor whether the year-end count can shrink.

Peak periods matter. White Friday in November, Ramadan and the lead-up to Eid change your pick rate. Schedule A-class counts before peak, and pause C-class counts during it. Don't try to count the whole building in the middle of a rush.

For Saudi sellers on Salla or Zid, the same logic applies. A wrong stock figure on your store means an oversold order, and with COD that often means a refused delivery and a return to put away.

Which tools do you need?

You can start with a spreadsheet and printed sheets. It gets hard once you have more than one warehouse, several sales channels and daily counts to post.

What you need from any system:

  • One stock quantity per SKU per location.
  • A way to generate a daily count list.
  • Blind count entry.
  • Variance reports with reason codes.
  • An audit trail showing who adjusted what and when.

Quickship's inventory module holds stock across multiple warehouses and syncs with Amazon, noon and Shopify. That gives you one system quantity to count against, so a marketplace sale and a warehouse adjustment don't drift apart. Quickship is software only. It doesn't store or handle your goods, and the counting is done by your own team.

What are common cycle counting mistakes?

  • Counting while stock is moving. Counters chase a pick and record a false variance. Freeze the location for the count.
  • Showing the system quantity. The count becomes a tick-box.
  • Adjusting without a reason. Fixing the number and moving on hides the cause. Log a reason every time.
  • Ignoring small variances. Five units over, five units under, repeated, tells you a process is broken.
  • Skipping the paperwork. The FTA names stock-count records. A count nobody can show is hard to defend later.
  • Setting the tolerance too loose. On high-value items, tolerance should be tight. On low-value bulk items it can be wider.
  • Starting without location codes. Fix the basics first.

Frequently asked questions

How many items should a warehouse count each day?

It depends on your SKU count and how often each class needs a check. Divide the number of counts you need in a cycle by the working days in that cycle. In the worked example above, 2,000 SKUs come out at about 27 count lines a day.

Can we keep picking while we cycle count?

Yes, if you count a small set of locations at a quiet time and pause movements on those locations only. Finish any open picks and putaways first, then count. Release the locations once the count is posted.

How long do we keep count sheets in the UAE and Saudi Arabia?

For UAE VAT, the FTA guide says at least 5 years after the end of the tax period. The FTA Corporate Tax guide says 7 years, so the longer period is the safer rule for count sheets. ZATCA says at least 6 years for VAT records. Check the official pages for updates.

Will my auditor accept cycle counting instead of a full count?

That is the auditor's call, not a rule in IAS 2, which covers valuation and not count frequency. Agree the plan with them before the year starts. Bring your count schedule, dated sheets and variance log.

What should we count first if we are starting from zero?

Start with your fastest-moving and highest-value SKUs, plus anything with repeated variances. Those are the lines where an error costs you most, through missed sales on Amazon.ae or noon or through wrong values in your books.

Sources

  1. FTA: Get to know your Tax Obligations (VAT record keeping, stock-count records)
  2. FTA: Corporate Tax General Guide (records, stock at period end, 7 years)
  3. ZATCA: Agents Guideline (6-year record retention)
  4. ZATCA: Guideline for Tax Invoicing and Records under VAT Provisions
  5. IFRS: IAS 2 Inventories

Rules and fees in the UAE and Saudi Arabia change. This guide reflects the sources above on 18 November 2026. Check the official source before acting on it.

Inventory Module

One stock count across your warehouses and sales channels.

Book a demo

Related guides

Instant quote