Skip to content
QuickshipTechnologies

CustomsUAE6 min read

Customs Clearance in Abu Dhabi: ATLP and Khalifa Port

Customs clearance Abu Dhabi explained: how ATLP works, how to register on TAMM, what to prepare for Khalifa Port and KEZAD, and common mistakes to avoid.

By · Published

Looking for the software itself? See our customs clearance software UAE, free to try for 3 days.

Customs clearance in Abu Dhabi runs through ATLP, the emirate's single-window trade platform, and not through Dubai Trade. If your cargo lands at Khalifa Port or moves through a KEZAD free zone, your declaration goes to Abu Dhabi Customs on ATLP, and you set up access through TAMM, the Abu Dhabi government portal.

This guide covers what ATLP is, what you register, what to prepare, and the mistakes that hold files up. Please confirm details for your own route with Abu Dhabi Customs or your broker. We could not verify duty and VAT rates against a primary source, so we don't quote them.

What is ATLP and how is it different from Dubai Trade?

ATLP is Abu Dhabi's official single-window platform for trade and customs. Maqta Gateway, the digital arm of AD Ports Group, develops and runs it under the Abu Dhabi Department of Economic Development (ADDED). Abu Dhabi's investment portal says Abu Dhabi Customs operates through ATLP, covering sea, air, land, rail and free zones.

The key point is that emirates run separate customs systems. Dubai has its own, and Abu Dhabi has ATLP. A login or a habit from one does not carry over to the other.

A short history helps you understand the names you will hear:

  • 2014: the government picked AD Ports to build Maqta PCS, the first UAE single-window port community system. MAMAR was built alongside it to send and receive customs declarations, according to the World Customs Organization magazine.
  • 2020: Maqta Gateway was mandated to extend that system into ATLP.
  • 14 June 2023: Maqta Gateway, the General Administration of Customs, Abu Dhabi and ADDED signed a service level agreement for digital customs services on ATLP, as Maqta announced. It covers the inspection and clearance unit.

Does Khalifa Port or KEZAD cargo go through ATLP?

Goods entering Abu Dhabi's ports and free zones are declared to Abu Dhabi Customs, and ATLP is the platform for that. Khalifa Port is run by AD Ports Group, the same group behind Maqta Gateway. KEZAD is an AD Ports Group free zone, and ATLP covers free zones.

The exact steps still depend on your licence type and on whether goods stay in the free zone or move onward. Say you hold a free zone licence and your cargo stays inside KEZAD. That is a different file from cargo you plan to move to a mainland warehouse in Dubai. Ask your broker which declaration type applies before you book the vessel.

What do you need to register before your first shipment?

You need an importer number from Abu Dhabi Customs, requested through TAMM. The TAMM importer number page lists the steps: log in with UAE PASS, submit the application and documents, then pay the fee.

Documents named on that page:

  • A trade licence (licences issued by the Department of Economic Development are the exception)
  • Emirates ID, if needed
  • A broker authorisation, if a broker applies for you

There is also a separate service, Create Customs Profile. TAMM lists it for entities with a trade licence issued outside the UAE, with a fee of AED 100. If your licence comes from Dubai or another emirate, don't guess which route applies. Ask Abu Dhabi Customs or your broker.

How does the clearance process work, step by step?

The TAMM Request for Clearance of Goods service lets the customer or an authorised person clear goods on entry or exit, before arrival or on arrival. It covers commercial entry, temporary admission, export and re-export, and transit through Abu Dhabi. It also covers goods moved between free zones, to another emirate, or to neighbouring countries.

A typical import flow looks like this:

  1. Get your importer number or customs profile sorted on TAMM before the supplier ships.
  2. Collect the documents. TAMM names the commercial invoice, the bill of lading (sea) or air waybill, and a packing list if needed.
  3. Choose who submits. You can do it yourself or authorise a broker.
  4. Submit the electronic declaration. You can pre-notify goods this way. The Abu Dhabi Media Office links this to the Invisible Customs initiative.
  5. Pay the duty and fees shown on your declaration. Rates depend on the goods and the declaration type, so check the current figures with Abu Dhabi Customs.
  6. Wait for release or inspection. ATLP has an inspection and clearance module for this step.
  7. Arrange collection with your own transporter or forwarder.

Abu Dhabi Customs has also announced an updated Clearance of Goods service, its first redeveloped service under the "Effortless Customer Experience" programme. It is listed in the Abu Dhabi Customs media centre. Screens and steps may change, so check TAMM before each new type of shipment.

ATLP or Dubai Trade: which one applies to your cargo?

It depends on where the cargo is declared. This table is a quick check, not legal advice.

Situation Where you declare What to check
Cargo arrives at Khalifa Port, you import into Abu Dhabi Abu Dhabi Customs, on ATLP Importer number on TAMM
Cargo goes into a KEZAD free zone Abu Dhabi Customs, on ATLP (covers free zones) Free zone rules and your declaration type
Cargo arrives at Jebel Ali for a Dubai consignee Dubai's own system Dubai Customs requirements, not covered here
Cargo lands in Abu Dhabi, then moves to another emirate Start in Abu Dhabi, with a transfer or transit declaration Ask your broker how the onward move is declared

The last row is where files get stuck. TAMM lists movement between emirates as part of the clearance service, so it is a real route. Confirm the declaration type with your broker before the vessel arrives.

What mistakes hold up clearance in Abu Dhabi?

Most delays come from paperwork, not from the platform. These come up again and again:

  • Registering late. The importer number or customs profile isn't ready when the cargo lands.
  • Using the wrong platform. A team used to Dubai Trade looks for a login that doesn't exist for Abu Dhabi cargo.
  • Mismatched documents. The invoice, packing list and bill of lading show different quantities or consignee names.
  • No broker authorisation. The broker applies, but the authorisation isn't attached.
  • Assuming one fee. The TAMM fee lines differ by service type. Ask for a written estimate.
  • Skipping pre-notification. Pre-notifying is possible. If you only start paperwork once the ship is in, you lose that time.

A hypothetical example. Say a trading company imports two containers of building materials through Khalifa Port. The bill of lading names the Abu Dhabi entity, but the invoice names a sister company in Dubai. The declaration stalls until someone fixes it. The fix is cheap if you catch it before the vessel sails.

How can software help with an Abu Dhabi file?

Software doesn't replace ATLP or TAMM. It helps you keep your own paperwork in order before you submit. If you run a brokerage or a trading business, a file usually waits on one missing document, and the person who knows where it is is on leave.

Quickship's Customs Clearance module is built for UAE and KSA customs work, so teams can keep documents, shipment details and file status in one place. Quickship is a technology company. It does not clear or move goods, and you still declare through ATLP or your licensed broker.

If you are weighing up broader clearance tools, start with a plain checklist of your documents. Then compare what you do by hand today with what a system could track.

Frequently asked questions

Can I use my Dubai Trade login to clear goods at Khalifa Port?

Not as a rule. Goods entering Abu Dhabi are declared to Abu Dhabi Customs, and that runs through ATLP, not Dubai's systems. Ask your broker or Abu Dhabi Customs to confirm the setup for your licence and route before the vessel arrives.

Do I need a customs broker to clear goods in Abu Dhabi?

Not always. TAMM says the customer or an authorised person can submit the clearance request. Many importers still use a broker, and the TAMM importer number page lists a broker authorisation as a document when a broker applies on your behalf.

Can I submit a declaration before the cargo arrives?

Yes. The Abu Dhabi Media Office says goods can be pre-notified by submitting an electronic customs declaration, and the TAMM service covers clearance before arrival or on arrival. Your documents must be ready earlier for this to help.

How much does clearance cost in Abu Dhabi?

The fee lines on the TAMM clearance page are not clear enough to quote here. AED 100 appears for the main service, with smaller amounts for postal and duty-free express statements. Duty and VAT depend on the goods, so check the current figures with Abu Dhabi Customs or TAMM.

Does Quickship clear goods for me?

No. Quickship is a software company. It does not clear, ship, store or import goods. Its Customs Clearance module is software that helps brokers and importers organise their own files.

Sources

  1. Invest in Abu Dhabi: Move goods easily (Abu Dhabi Customs and ATLP)
  2. Abu Dhabi Media Office: Maqta Gateway launches inspection and clearance services on ATLP
  3. TAMM: Request for Clearance of Goods
  4. TAMM: Issuing Importer Number Request
  5. TAMM: Create Customs Profile

Rules and fees in the UAE and Saudi Arabia change. This guide reflects the sources above on 12 November 2026. Check the official source before acting on it.

Customs Clearance Module

Clearance software for the UAE and KSA, integrated with customs and clearing agents.

Book a demo

Related guides

Instant quote